Hold Fast Accessories:

3-1/2" Vacuum Spindle Extenders. 

• The extenders allow deep bowls to be turned without hitting the lathe.
• Hole through center allow vacuum to go through center of extenders.
• Can be used on standard - non vacuum chuck heads.
• Flats on extenders allow easy removal with wrench if necessary
• Each extender includes two No Lock Spindle Washers.
  • A861: 1" x 8 Spindle extender
  • A862: 1-1/4" x 8 Spindle extender
  • A863: 33mm Spindle extender

Spindle Adapters:

• All with hole through center for vacuum applications
• Can be used on standard - non vacuum chuck heads.
• Flats on extenders allow easy removal with wrench if necessary
• Each adapter includes two No Lock Spindle Washers.
  • A864 1"x8 Female to 1.25"x8 Male
  • A865 1"x8 Female to 33mm Male
  • A866 1.25"x8 Female to 1"x8 Male
  • A867 1.25"x8 Female to 33mm Male
  • A868 33mm Female to 1"x8 Male
  • A869 33mm Female to 1.25"x8 Male

Chuck head to Vacuum head centering adapter for tail stock

• Allows easy  transfer centering projects from standard chucks to a vacuum head by attaching a standard chuck on to a tail stock with a One-Way type live center or #2 Morse taper
  • A870: 1"x8 chuck x 3/4"-10 live center
  • A871: 1.25"x8 chuck x 3/4"-10 live center
  • A872: 33mm chuck x 3/4"-10 live center
  • A873: 1"x8 chuck x #2 Morse taper
  • A874: 1.25"x8 chuck x #2 Morse taper
  • A875: 33mm chuck x #2 Morse taper

No Lock Lathe Spindle Washers

• Precision molded.
• For all spindle applications.
• Provides additional vacuum seal and easy no-lock action.
  • P600: .75" Spindle washer
  • P601: 1" Spindle washer
  • P602: 1.25" Spindle washer
  • P603: 33mm Spindle washer

Magnet Mounts

• Two rare earth magnets provide the holding power to mount the V810 Vacuum Generator in easy reach.
  • V841: Two mounting magnets

Vacuum Seal Kits

• Replacement Vacuum Head Seals.
  • V840-3: for 3-1/2" V803 vacuum chuck
  • V840-6: for 6" V806 vacuum chuck
• 10' Vacuum Seal Kit for making special vacuum heads and holding fixtures.
  • V 847: Includes 10' seal cord and Stick Tac pressure sensitive adhesive
• Stick Tac pressure sensitive adhesive
  • 140: 1/4oz bottle of pressure sensitive adhesive

Air Compressor Regulator Kits

• Allows isolated regulated air to our Standard V810 Vacuum Generator.
  • V846: Includes air regulator, gauge, and fittings

Vacuum Control Kits

• Controls over vacuum often encountered with electric vacuum pumps.
  • V848: Vacuum controls, Vacuum Gauge, fittings, and vacuum hoses included.