Hold Fast Products
NEW and Improved Products
-
NEW: Wood Stabilization System: Stabilize and color your own wood!
- NEW: Non Stick Bushings for CA Wood Finish
- Improved V810R Vacuum Generator: more vacuum and vacuum volume
Hold Fast Wood Stabilizing Vacuum system
-
Turnkey system to stabilizing wood - including our Stick Fast Stabilizing Resin
Hold Fast Vacuum Chucking
-
An economical, complete Vacuum Chucking system:
- All you need is a Wood Lathe and a standard Air Compressor
- Works with almost any #2 Morse Taper lathe with hole through spindle
- 1"x8, 1-1/4"x8, and 33mm spindle chucks and adapters
- Quiet operation
Hold Fast Accessories
-
Integrated line of products for Spindles
Vacuum Chucking Video
with Dave Hout
Vacuum Product and trouble shooting
Wood Stabilization Vacuum System
Spindle Accessories
Face Plates
complete list of Hold Fast Products by Lathe Spindle Size
Note: Should be using a 6" vacuum chuck for this project. A small Air Compressor is all that is needed
Economical Vacuum Chuck Heads
3", 6", and 8" 3" Face Plate
that quickly converts to a 4" or 6"
Hold Fast Buffing Extender and wide variety of adapters
Vacuum Product and trouble shooting
Wood Stabilization Vacuum System
Spindle Accessories
Face Plates
complete list of Hold Fast Products by Lathe Spindle Size
Note: Should be using a 6" vacuum chuck for this project. A small Air Compressor is all that is needed
Economical Vacuum Chuck Heads
3", 6", and 8" 3" Face Plate
that quickly converts to a 4" or 6"
Hold Fast Buffing Extender and wide variety of adapters
Updated and improved V810R Vacuum Generator and V802 Vacuum Adapter